Operation; Cleaning And Maintenance - Dometic TBW203 Manual De Instrucciones

Operation

7 Operation
!
WARNING!
Ensure that the objects placed in the device are suitable for cooling or
heating to the fixed temperature depending on the version.
A
NOTICE!
• The interior temperature of the device is affected by the ambient
temperature.
– Cooling version: Observe that the set fixed temperature of
5 °C is fallen below, if the ambient temperature sinks to below
4 °C. The cooling version can keep items cool at up to 20 °C
below the ambient temperature.
– Heating version: Observe that the set fixed temperature of
39 °C is exceeded, if the ambient temperature rises to above
39 °C.
I
NOTE
Before starting your new cooler for the first time, you should clean it
inside and outside with a damp cloth for hygienic reasons (chapter
"Cleaning and maintenance" on page 8).
➤ Switch on the device using the power switch (fig. 2 1, page 3).
✔ The red LED on the power switch lights up
✔ The device starts cooling or heating to the fixed temperature.
8

Cleaning and maintenance

A
NOTICE! Damage hazard
• Never clean the device under running water or in dish water.
• Do not use abrasive cleaning agents or hard objects during cleaning
as these can damage the device.
➤ Occasionally clean the device interior and exterior with a damp cloth.
➤ Make sure that the air inlet and outlet vents on the device are free of any dust and
dirt, so that heat can be released and the device is not damaged.
8
TBW203
EN