Troubleshooting Guide; Cleaning Instructions; Replacement Parts List; Need Help - Good Earth Lighting 9506-CLR-I Manual De Instrucciones

Fuse Replacement Instructions
Grasp the plug, and unplug the Flexolight from the outlet, and allow the Flexolight to cool
down. Never unplug this product by pulling on the cord. The fuse compartment is located in
the attachment plug.
1
Fig. 1
2
Fig. 2
3
Fig. 3

Troubleshooting Guide

Minor problems often can be fixed without the help of an electrician. Before doing any work on the
fixture, shut off power supply at the circuit breaker panel to avoid electrical shock.
Problem
Fixture doesn't light
Fuse blows or circuit breaker
trips when light is turned on

Cleaning Instructions

Your fixture is made from quality materials that will last for many, many years with
minimum care. You may want to periodically clean the fixture using a mild, non-abrasive
glass cleaner and soft cloth. Do NOT use solvents or cleaners containing abrasive
agents. When cleaning the fixture, make sure you have the power turned off and do not
spray liquid cleaner directly onto the connector or plug.

Replacement Parts List

Keep this guide handy for
ordering replacement parts.

Need Help?

In the event you are missing a part or have questions regarding installation
please visit our website at www.goodearthlighting.com/support.html or
call the Customer Care Center 1-800-291-8838, 8:30 a.m.-5 p.m., CST, Monday-Friday.
Slide the fuse access cover toward the blades to
(Fig. 1)
open it .
Remove the fuse carefully by tippong the plug the
fuse will fall out into your hand
Place a new compatible fuse into the holder. Use ONLY a
125V, 5A fuse. Close the fuse compartment by sliding the
fuse access cover back into place
Cause
Bulb is defective
Power is off
Bad plug connection
Bad switch
Crossed wires or power wire
is grounded out
Hardware Kit
HDW9506
HDW9512
HDW9524
HDW9548
- 4 -
(Fig. 2)
.
(Fig. 3)
.
Solution
Replace bulb
Check if power supply is on
Check wiring
Test or replace switch
Check wiring connections