Product Features - Tripp-Lite B160-101-DPSI El Manual Del Propietario

Product Features

• Extends and distributes audio/video, serial and IR control signals over
Cat5/Cat6 cabling.
• Models available with Component Video + Stereo Audio, DisplayPort,
HDMI**, and VGA + Stereo Audio.
• Converts source video to an IP-based signal that can be transmitted to
and distributed through a network switch.
• Transmitters can be located up to 328 ft. (100 m) from the switch,
with an additional 328 ft. (100 m) between the switch and the receiver,
for a total distance of 656 ft. (200 m).
• Can also be used in a point-to-point installation where the transmitter
directly connects to a receiver up to 328 ft. (100 m) away.
• Designed for managed network switches with IGMP , which allow login and
remote management via the switch interface.
• Video source can be sent to any analog or digital display (e.g. Component
Video to HDMI, VGA to HDMI, HDMI to DisplayPort, HDMI to HDMI).
• Display a single source on a single monitor or distribute a single signal to
multiple monitors.
• B160-200-HSI and B160-201-HSI receiver units include two HDMI
output ports for connection of two monitors.
• Connect up to 64 transmitters and 255 receivers in a single managed
switch installation.
• Utilizes H.264 video compression standard.
• Extends IR control signals that control a source
(such as a Blu-ray™player) from a remote display.
• Uses a 20 kHz to 60 kHz IR frequency.
• Supports RS-232 Serial baud rates up to 57600 bps.
• VGA video models support video resolutions up to 1920 x 1440,
including 1080p.
• DisplayPort and HDMI models support video resolutions up to
1920 x 1080 (1080p).
4