General Power Tool Safety Warnings - Kompernaß PARKSIDE PUV 1100 A1 Traducción Del Manual De Instrucciones Original

General power tool
safety warnings
WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
■ Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
■ Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entan-
gled cords increase the risk of electric shock.
■ If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
■ Do not use the power tool if the switch does
not turn it on and off.
Any power tool that cannot be controlled with
the switch is dangerous and must be repaired.
Wear protective gloves!
Wear safety shoes!
Warning against flammable substances!
Risk of burns caused by hot surfaces!
Do not touch!
Protect from rain and moisture!
PUV 1100 A1
Outlet temperature on the heating
element max. 800°C!
Unplug the appliance immediately if the
cable is damaged or has been cut.
This device can be used by children
■
aged 8 years and over and by
persons with reduced physical,
sensory or mental capabilities or a
lack of experience and knowledge
if they are supervised or have been
instructed in the safe use of the
device and understand the resulting
dangers. Do not allow children to
play with the appliance.
Cleaning and maintenance tasks
must not be carried out by children
unless they are supervised.
Do not use this appliance if you are
■
tired, ill or under the influence of
alcohol or other drugs or medica-
tion.
Do not leave the appliance unat-
■
tended while it is in operation or is
still hot.
After use, place on a non-combus-
■
tible surface and allow to cool
completely before packing away.
Always wear sturdy footwear and
■
protective gloves.
GB │ IE │
3 ■