Cooper Lighting Solutions Iris ZLM03 Instrucciones De Instalación página 3

9. Gently unplug micro connector from LED module
(Figure 8).
10. Remove existing LED from heat sink (Figure 9).
11. Carefully clean the old thermal grease from the heat
sink (Figure 10).
12. Using the supplied tube of thermal grease, apply
a 3/16" ball of thermal grease to the center of the
heatsink (Figure 11).
13. Place new LED onto center of heat sink. Repeat
previous steps in reverse order to reassemble module
and re-install into fixture (Figure 12).
Figure 8.
Figure 9.
Installation Instructions – ZLM03 LED Module - PN4LED, MH4LED
Figure 10.
Figure 11.
Figure 12.
COOPER LIGHTING SOLUTIONS
IB520007EN Installation Instructions
3