Safety Instructions - ADA INSTRUMENTS CUBE 3D Manual Del Usuario

6
English
SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS
• Measurements through glass or plastic windows;
• Dirty laser emitting window;
• After line laser has been dropped or hit. Please check the accuracy;
• Large fluctuation of temperature: if instrument will beused in cold areas
after it has been stored in warm areas (or the other way round) please wait
some minutes before carrying out measurements.
PRODUCT LIFE
Product life of the tool is 7 years. The battery and the tool should never
be placed in municipal waste. Date of production, manufacturer's contact
information, country of origin are indicated on the product sticker.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
• It cannot be completely excluded that this instrument will disturb other
instruments (e.g. navigation systems);
• will be disturbed by other instruments (e.g. intensive electromagnetic ra-
diation nearby industrial facilities or radio transmitters).
5
LASER CLASS 2 WARNING LABEL ON THE LINE LASER
LASER CLASSIFICATION
The line laser is a laser class 2 laser product accortding to DIN IEC 60825-
1:2014. It is allowed to use unit without further safety precautions.

SAFETY INSTRUCTIONS

Please follow up instructions given in operators' manual. Do not stare into
beam. Laser beam can lead to eye injury (even from greater distances).
Do not aim laser beam at persons or animals. The laser plane should be
set up above eye level of persons. Use the line laser for measuring jobs
only. Do not open line laser housing. Repairs should be carried out by au-