Cutting Height Adjustment; Engine Ignition - Stiga CR 434 Serie Manual De Instrucciones

OPERATING INSTRUCTIONS
1. COMPLETE ASSEMBLY
NOTE The machine can be supplied with some parts al-
WARNING! Unpacking and completing the assem-
bly should be done on a flat and stable surface, with
enough space for moving the machine and its packag-
ing, always making use of suitable equipment.
Disposal of the packaging should be done in accord-
ance with the local regulations in force.
1.1
• Electric push-button ignition models
2. CONTROLS DESCRIPTION
NOTE
plained in the previous pages.
2.1
Lever positions are indicated on the relevant plate.
a throttle.
2.2
2.3
released.
gaged.
WARNING! To prevent damage to the transmis-
sion, do not pull the machine backwards with the trans-
mission engaged.

2.4 Cutting height adjustment

DO THIS WHEN THE CUTTING MEANS IS STATIONARY.
-
3. GRASS CUTTING
-
NOTE This machine can be used to mow lawns in a num-
chine based on how the lawn is to be mowed.
3.1a
– Lift the rear discharge guard (1) and fasten the grass
3.1b
-
3.1c
mulching (where applicable)
-
3.1d
grass (where applicable)
-
– Release the side discharge chute (8).
- – Lift the rear discharge guard (1).

3.2 Engine ignition

-
ual.
3.2a
• Manual ignition models
-
-
-
-
-
-
-
-