Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION INSTRUCTIONS
Step 1. Connect the sensor to
the transformer and the sensor
to the lights by pushing the plug
into the sensor socket and hand
tighten the nut around the plug
and socket to secure.
Step 2. Place the lights in or out
of the water. Make sure that the
transformer and sensor are not
submerged and the sensor is
facing up.
NOTE: At night, the lights will
automatically turn on. At sunrise,
they will automatically turn off.
Step 3. Place the control box in a
visible and open space
NOTE: the control box cannot be
submerged or withstand heavy
rainfall.
Step 4. Plug the transformer into a
properly grounded electrical outlet.
Step 5. A is the power on and
off buttons.* B are the solid color
option. C are the effects buttons.
When solid color is chosen, D
buttons can brighten the color or
dim the color. When effects are
chosen, D buttons can increase or
decrease the speed.
*The remote sensor will time-out during
periods of inactivity. If your selection is
not being read, simply press the "strobe"
and "fade" buttons simultaneously before
making your next selection.
1
2
3
4
5
D
B
GFCI
outlet
A
C
7
Publicidad
