Fracarro KDF Instrucciones De Funcionamiento página 14

Enter the INPUT with the
and to the program to be selected. The receiver contains a preset list* that simplifies the tuning of a specific program.
For some presets, you will need to select the correct polarity received from the universal H/V 4-input LNB from the input of
the KDF receiver. Select the preset 'Default' to set the E45 channel of the PAL-BG standard at the output.
INPUT
Set remote power f or LNB
Set the DiSEqC tone
Reading the frequency of the
local oscillator
IF f requency of the transponder
to be received
Symbol rate of the transponder
to be received
FEC of the transponder
to be received
List of available programs
5.5 MENU INPUT
arrow key or with the
Selection of a
pre-memorised channel
PRESET OFF
Enter with
LOAD PRESET
SAVE PRESET
LNB OFF
DiSEqC A
OL FREQ. (MHz)
IF FREQ. (MHz)
SYMBOL RATE
FEC AUTO
SERVICE LIST
SERVICE PROPR.
PID TELETEXT
SERVICE TYPE
AUDIO TYPE IN
key of the TPE to set the parameters relevant to the transponder
PRESET 10
Enter with
Loading ...
The "save" function is not available on default
12V/22KHz
satellite A
satellite B
D
satellite C
satellite D
AUTO Read-only
950 2150
1000 40000
Read-only
1/N
PROGRAM 1
Name of the selected
PROGRAM NAME
ID Service of the selected
SERVICE ID
program
PID PCR of the selected
PID PCR
PID PCR
program
Video PID of the selected
Video PID
PID VIDEO
program
Audio PID of the selected Audio PID
PID AUDIO
program
Teletext PID of the Teletext PID
selected program
Type Type of the selected
program
Video Format Video Format of the
FORMAT
selected program
Audio type of the selected
Audio type
program
14
The upload preset
OFF
function enables the
DEFAULT
memorisation of the following
PRESET 1
input parameters: LNB,
PRESET 2
PRESET 3
DiSEqC tone, IF freq.,
PRESET 4
Symbol rate, displayed
PRESET 5
channel, service ID and
PRESET 6
PRESET 7 subtitles. The
PRESET 8
memorized output
PRESET 9
parameters are video
PRESET 10
format and audio type.
OFF
12V/0KHz
12V/22KHz
Increase/decrease by TPE arrows or enter the
value directly by the digit keyboard.
Increase/decrease by TPE arrows or enter
the value directly by the digit keyboard.
"Not available": transponder not
N/N
locked.
PROGRAM N
"NONE": ID serv ice not present
program
Enter value by TPE digit
keyword
Increase/decrease by TPE arrows