Declaration Of Conformity - Felisatti MKF1200/VE2 Instrucciones De Servicio

- Motor maintenance: Take the utmost care to ensure
that the motor winding is not damaged and does not
become damp with oil or water.
- Brush replacement: The brushes disconnect auto-
matically and should be replaced after 150-200 hours
use or when they are less than 10 mm long. Have
them replaced by an Official Service Centre.
- Clean the machine thoroughly after each use with a
blast of dry air.
- The vents of the machine should be kept clear at
all times.
- Check that the mains lead is in good condition. If it is not,
take it to an Official Service Centre to have it replaced.
- Use only Felisatti accessories and spares. The parts
the changing of which is not covered in this instruction
manual, should be replaced in a Felisatti Official Ser-
vice Centre (See Warranty/Official Service Centre ad-
dress leaflet).
Do not dispose of electric tools in
the household waste!
In accordance with European Directive 2002/96/EC
relating to old electrical and electronic appliances and
its translation into national law, used electric tools must
be collected separately and recycled in an ecologically
desirable way.
WARRANTY
See general warranty conditions printed on the attached
sheet

DECLARATION OF CONFORMITY

We hereby declare, under our own responsibility,
that the FELISATTI products described in this
manual MKF1200/VE2 and MKF1600/VE2 comply
with the following standards or standard docu-
ments: EN60745-1:2008, EN55014-1:2006+A1,
EN55014-2:1997+A1+A2,
2:2006+A1+A2 and EN61000-3-3:2008 in accor-
dance with
2006/95/EC, 2004/108/EC and 2002/95/EC.
11
We reserve the right to make technical changes 07/2011
EN61000-3-
EU Directives 2006/42/EC,
Francisco Ruiz
Plant Mgr.