Apex Cleco mPro400GCD-P Manual De Usuario página 12

1
EN
Connectors – external power supply
Signal X9
Pin
12
11
10
9
8
7
6
5
4
3
2
1
+ -
Inputs
• External 24 V power supply for the controller.
• Pin 11 and 23 (common GND) serve as a "return line"
for the outputs.
• The GND for the external 24 V power supply must be
used as the return line for Pin 11 and 23.
12
I/O Name
Off GND Int.
On GND I/O
Output O3
Output O2
Output O1
Output O0 (linking OK), e.g.
Input I3 (tool start), e.g.
Input I2
Input I1
Input I0
On +24 V O
Off +24 V Int.
P2300HW | 2019-03
Signal X10
Pin I/O
24 Off
23 On
22 Output
21 Output
20 Output
19 Output
18 Input
17 Input
16 Input
15 Input
14 On
13 Off
Outputs
• External 24 V power supply for the controller.
• Pin 2 and 14 (common output) are the voltage source
for the inputs.
• Pin 2 and 14 must be connected to the external 24 V
power supply.
Name
GND Int.
GND I/O
O3
O2
O1
O0 (linking OK), e.g.
I3 (tool start), e.g.
I2
I1
I0
+24 V O
+24 V Int.
Apex Tool Group