Inserting And Removing The Battery - Derby cycle Focus Manual Del Usuario

Inserting and Removing the Battery

Inserting the battery
Place battery onto the docking station
1
Slide the battery down the rail gently towards connector
2
The release arm will close automatically as battery slides towards connector
3
Do not force the battery arm closed, this can bend the battery connector
With the release arm almost closed, hold it in place and simultaneously press in the lock cylinder – you
4
will hear an audible >click< when the battery is properly inserted
Removing the battery
Turn off the BionX propulsion system (no illustration)
1
Lightly press on the battery release arm, insert the key and turn clockwise
2
The lock cylinder will protract, freeing battery release arm (no illustration)
3
Remove the battery by opening release arm
4
Lift the battery from dock by sliding upwards
5
Remove the battery
6
4
2
6
1
5 6
2
4
3
>CLICK<