Charging The Phone - ZTE Blade V30 Vita Guia De Inicio Rapido

Setting Up Your Phone
The nano-SIM card(s) can be installed or
removed while the phone is turned on.
WARNING!
To avoid damage to the phone, do not use any
other kind of SIM cards, or any non-standard
nano-SIM card cut from a SIM card. You
can get a standard nano-SIM card from your
service provider.
1. Insert the tip of the tray eject tool into the
hole on the card tray.
NOTE:
Please use the tray eject tool included in
the box. Otherwise the card tray may not be
ejected.
CAUTION:
Never replace the included tray eject tool with
sharp objects. Ensure that the tray eject tool
is perpendicular to the hole. Otherwise, the
phone may be damaged.
5
2. Pull out the card tray and place a nano-
SIM card on the right slot and another
nano-SIM card or a microSDXC card
(optional) on the left slot, as shown.
Carefully slide the tray back into place.
NOTE:
If two nano-SIM cards are installed, both cards
can connect to the 4G, 3G, or 2G network, and
either card can be used for mobile data.

Charging the Phone

Your phone's battery should have enough
power for the phone to turn on, find a signal,
and make a few calls. You should fully charge
the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB
Type-C cables. The use of unapproved
accessories could damage your phone or
cause the battery to explode.
6