Intellinet Network Solutions 507356 Manual De Instrucciones página 4

14-Slot Media Converter Chassis Instructions
4. Insert Media Converter into the chassis, and then
tighten the screw by turning it clock-wise.
5. Install the chassis in a standard 19" rack or cabinet.
Connect both power supplies with a power outlet
and set them both to the on position.
• Always power on both power supplies by setting both power buttons to the on
position. Doing so will significantly increase the life-span of the power supplies.
• At dangerous power levels, the rear POWER LED will turn red.
Disconnect the chassis from the power at once.
• If the fuse on the rear has blown, the POWER LED
will turn off. Disconnect the chassis from the
power and replace the fuse. Power the chassis
back on. If the fuse breaks again, discontinue
use of the chassis at once.
• If one of the chassis fans stops working, discontinue use of the chassis at once.
Contact your place of purchase concerning the possible warranty replacement.
• If a media converter stops functioning, try resetting the media converter in the
chassis to ensure proper contact of the power connectors.
• If one of the power supplies has failed, do not attempt to replace it yourself.
Contact your place of purchase concerning the possible warranty replacement.
4
Maintenance