D.A.S. DSP-48 Manual Del Usuario página 21

Copy Output 1
to Output:2
3. Main menu switch operation
MAIN MENU:*.....
PROGRAM
Pres sRECALL
Pre ss SAVE/ENTER
PROGRAM
Load preset
4. Program management
Program management includes below sub-menu:
Load Preset mode Load a program
4.1 Load preset mode
Ten preset crossover mode, input source of preset mode and
crossover setting refer to appendix preset mode input source
and crossover parameter sheet.
Press PREV key to enter output low pass sub-menu.
Press
attack time and release time and so on option.
Arrow indicate current option.
Press PARAMETER key to switch channel.
COPY OUTPUT DATA
Rotate PARAMETER to change target output channel number.
Press <NEXT> to enter into the output gain sub -menu.
Press <PREV> to enter into the output EQ sub- menu.
Press the PARAMETER to switch the channel.
PressPREV
MAIN MENU:.*....
SECURITY
Press NEX T
Press PREV
PROGRAM
Load a program
Press NEXT
Program
Load Preset
Press SAVE/ENTER key to operate load preset
LOAD PRESET
1:4X2-WAYCrossover
Use PARAMETER to change preset serial number, press SAVE/ENTER key to
load preset program.
LOADING PRESET
1:4X2-WAYCrossover
and key to switch limiter threshold, limiter ratio,
P ress PR EV
Pre ss NEX T
P ress PR EV
Pre ssNEX T
Store a program
OPERATION
MAIN MENU:..*...
DUMP PROGRAM
Press PREV
P ress NEXT
MAIN MENU:...*..
RECEIVE DUMP
PROGRAM
Store a program
20