Publicidad
Idiomas disponibles
Idiomas disponibles
Place the compressor on a flat surface with a maximum
inclination of 10° (fig. 3), in a well ventilated place, away from the
action of atmospheric elements and not in explosive
environments.
If the surface is sloping and smooth, check that the compressor in
operation does not move, otherwise immobilize the wheels with
two wedges.
If the surface is a bracket or shelf, make sure that the device is
not in danger of falling out by attaching it properly.
For good ventilation and efficient cooling, it is important that the
compressor belt guard is 100 cm away from any wall (fig. 4).
Compressors mounted in tanks, with fixed legs, do not have to be
fixed to the floor in rigid mode. The assembly of 4 anti-vibration
supports is recommended.
100 cm
Instructions for use
Carry the compressor correctly, do not turn it over or lift it with hooks or cables (fig. 5 - 6).
80
Replace the plastic plug in the crankcase cover (Fig. 7 - 8) with the oil dipstick (Fig. 9) or
relative drain plug supplied with the instruction manual.
Fig. 6
Electric compressor operation
Check the oil level using the oil
dipstick (fig. 9) or oil level
indicator light (fig. 10) as a
reference.
Electrical connection
MONO PHASE COMPRESSORS are supplied with an electric
cable and a two-wire plus ground plug. It is important to
connect the compressor to a grounded socket (fig. 11).
NOTE: Any damage caused by incorrect connections of the
power supply to the line automatically invalidates the
warranty of the electrical parts. In order to avoid faulty
connections, it is advisable to consult a qualified technician.
81
Publicidad
