Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION AND CARGO LOADING
INSTRUCTIONS
1. Spread out the cargo bag onto your cargo carrier, away from vehicle.
2. Place items in plastic bags before loading for extra protection from water
condensation.
3. Unzip the cargo bag completely and load bag, placing larger heavier objects in
first. Continue to load, placing smaller, lighter items on the top, creating a compact
load.
4. Close zipper completely. Make certain the flap is pulled down to completely cover
the entire zipper and sealed by the hook and loop closures.
5. Attach the long ends of the lashing straps to the (6) buckles on the top of the cargo
bag. Fig 1.
6. Attach the short ends of the lashing straps to the cargo carrier. Fig 2.
7. If there is not an exposed bar on the carrier, attach the short ends of the lashing
straps to the carrier as shown in Fig 3. Loop the short end of lashing strap through
the steel oval ring and fasten the loose end through the buckle. Insert the steel
loop through the hole in the cargo carrier, and turn the steel oval ring.
8. Pull to tighten the straps until bag is securely attached. The cargo bag should look
like Fig 4 when installed properly.
9. NEVER use straps to secure additional cargo. All objects must be placed inside
your cargo bag.
10. CHECK THAT THE RAINPROOF CARGO BAG IS SECURE.
If your rainproof cargo bag is NOT secure, DO NOT use your rainproof cargo bag.
Remember the cargo can shift during travel. Readjust as needed. If movement
continues, stop use.
4
PAGE 2
63604_IN Rev A • Questions? (800) 234-6992 • ReeseBrands.com
1
2
3
Publicidad
