Ghibli S4 EXPLORER Uso Y Mantenimiento página 49

- Disconnect the wires (4) of the operator-
presence sensor (5).
- Remove the protective guard (3), lifting
it using the appropriate handles (6), and
disconnect the emergency button's sock-
et (A).
- Position the batteries as shown in the dia-
gram and connect them as shown in the
electrical scheme below using the sup-
plied cables and plugs.
3
7
A
8
6
EN - 9
- Connect the plug for the batteries (7) to
the socket (8).
- Reposition the protective guard (3) and
reconnect the wires of the operator-pres-
ence sensor, performing their disassem-
bly operations in reverse order.
NOTE:
The batteries must be installed and connect-
ed by qualified personnel.
EN
5
4
Fig. 4