Assembly Components; A - Squeegee Installation; Charging The Battery - Ghibli S4 EXPLORER Uso Y Mantenimiento

3.1 - ASSEMBLY
COMPONENTS
3.1.a - Squeegee installation (Fig.7)
- Insert the squeegee (1) into its support
plate (2) and fasten it by tightening the
two knobs (3).
- Connect the suction tube (4) to the squee-
gee's intake opening.
4.1 - CHARGING THE
BATTERY
DANGER:
Charge the batteries in well-ventilated ar-
eas which comply with standards in force
in the country of use.
For safety-related information, follow what
is described in chapter 1 of this manual.
WARNING:
For the information and warnings relative
to the battery and the on-board battery
charger (if present), refer to that which is
indicated in the battery charger's manual,
attached to this user and maintenance
manual.
WARNING:
The machine comes pre-calibrated for
function with gel batteries. If acid batter-
ies are to be installed, please contact our
Assistance Centre in order to re-calibrate
the machine.
It is forbidden to use the machine with gel
batteries if it has been calibrated for use
with acid batteries.
NOTE:
For more information regarding machine cali-
bration, see section 11.1.l.
NOTE:
10 hours are needed for complete battery
charging. Avoid partial recharges.
4
3
EN - 11
2
1
EN
Fig. 7