Ghibli S4 EXPLORER Uso Y Mantenimiento página 58

EN
10) Solution quantity adjustment
Press the (+) or (-) buttons to display the
following screen;
use the (+) and (-) buttons to increase or
decrease the water flow. The flow can be
adjusted between a minimum of 0 and a
maximum of 6 litres/min.
11) Detergent quantity adjustment
(optional)
Press this button to display the following
screen;
use the (+) and (-) buttons to increase
or decrease the detergent flow. The flow
can be adjusted between a minimum of
0.5% and a maximum of 3%.
12) Operating speed adjustment
Press the (+) or (-) buttons to display the
following screen;
use the (+) and (-) buttons to increase or
decrease the operating speed. The speed
can be adjusted between a minimum of 0
and a maximum of 6 km/h.
13) "ALL IN ONE" automatic cycle
Press this button to enable the automatic
cycle.
This cycle provides for the activation/
deactivation of the machine's functions
in their proper sequence; the sequences
are the following:
- Press the button;
- The brushes are lowered;
- Engage forward movement. The machine
moves, the brushes begin to turn and the
solution is dispensed.
- After about 1 second, the squeegee is
lowered and then the suction unit is acti-
vated.
Once the cleaning cycle has been complet-
ed, press the button again to deactivate the
automatic cycle. The brushes will stop mov-
ing and will be raised, solution dispensing will
cease and the suction unit will shut off after
XXX
5 seconds, in order to suction any remaining
liquid from the floor.
14) SETUP/ENTER Button
Button with two functions:
- If pressed once, it allows the operator to
view the configuration screens.
- If pressed and held down for three sec-
onds, it allows for access to the data in-
sertion screen, thereby allowing the op-
erator to insert and save new machine
settings.
Viewing
screens
- Turn the key to its "ON" position. The fol-
lowing screen will appear on the display:
a
c
a) Directional movement enabled:
↑ = Forward movement
↓ = Reverse movement
N = Neutral
b) Battery charge status, the dark parts of
the scale indicate the remaining battery
life.
EN - 18
the working environment
N
24.5
00000:12
b
e
d