B - Preparing The Machine And Choosing The Cycle; C - Using The Machine - Ghibli S4 EXPLORER Uso Y Mantenimiento

EN
9.1.b - Preparing the machine and
choosing the cycle (Fig. 21)
- Sit in the driver's seat and release the
parking brake (1).
Working cycle:
- The machine can perform 4 working cy-
cles:
Drying only cycle:
- To perform the drying cycle only, press
button (2) The aspirator starts up.
Brushing only cycle:
- In order to perform the brushing cycle
alone, press the button (3) to predispose
the machine for the rotation of the brush-
es; the brushes will rotate once the ma-
chine begins to move.
Washing, brushing cycle:
- Press the button (3) to predispose the
machine for the rotation of the brushes
and turn the lever (4) to its "ON" position
to predispose it for water dispensing.
The brushes will begin to rotate and the
machine will begin to dispense water
(only with forward movement) once the
machine begins to move.
Washing, brushing, drying cycle:
- Turn the lever (4) to its "ON" position to
predispose the machine for dispensing
water.
Press the "ALL IN ONE" button (5) to ac-
tivate the automatic cycle.
9.1.c - Using the machine (Fig. 21)
- After having started the machine and
chosen the type of cycle, use the button
(6) to engage the desired movement di-
rection.
- Use the accelerator (7) to begin the clean-
ing operations.
NOTE:
Release the accelerator to stop the rotation
of the brushes and the dispensing of water.
NOTE:
Proper floor cleaning and drying is performed
by driving the machine forwards. When driv-
ing in reverse, the squeegee is raised and
the suction unit, for removing the water from
the floor, is deactivated.
2
4
EN - 22
1
6
8
3
5
7
Fig. 21