Intended Use - MSA V-GARD 900 Manual De Instrucciones

1

Intended Use

The user shall contact the health and safety representative to ensure he is given the proper
protection by the personal eyewear during live working conditions. This helmet provides limited
top impact and penetration protection, the integrated face shield provides eye and face protection.
The helmet is certified according to:
EN 397: 2012 + A1:2012 options: -30°C / LD / 440 V AC / MM
-
EN 50365: 2002 for non-vented helmets
-
The face shield mounted on the helmet protects the user against low-voltage electrical arc short-
circuits.
The face shield is certified according to EN 166:2001, EN 170:2002 and GS-ET-29:2011-05.
The helmet and faceshield satisfiy the requirements of (EU) Regulations 2016/425.
The Declaration of Conformity can be found online: https://MSAsafety.com/DoC
Depending on the individual helmet configuration, the helmet may be marked as explained below:
EN 50365: Electrical class 0 for installations with nominal voltage up to 1000 V AC
and 1500 V DC
The electrically insulating helmet cannot be used alone. It is also necessary to use other insulating protective equipment according to
the risks involved in the work. Check voltages likely to be encountered, do not exceed the limits of helmet and do not use where the
insulation properties could be compromised.
LD Lateral Deformation
MM Molten metal splash
-30 °C Very low temperature
440 V AC Electrical properties
CE 0082 CE 0082 CE mark with four digit identification number of the notified body APAVE
Standards and Regulation for Face Shields
The inner frame and face shield are marked as explained below:
Standards
EN166:2001, EN 170:2002
and
GS-ET-29: 2011-05
regulation:
(=)
General use
Ukrain (UkrSEPRO)
Eurasien Economic
Commission (EurAsEc)
Refer to user manual
2C-1.2 UV Filtering according to EN170:2002
MSA Identification of the manufacturer
1 Optical Quality
166 Number of the standard
3 Protection against Liquid Splash
B Resistance to medium energy impact 120 ms
"8" = Electric arc resistance according to EN166:2001
8-1-0 "1"= Protection class 1 (4 kA) according to GS-ET-29
"0"= Best Light Transmission Class according to GS-ET-29 =, VLT>75%
9
Resistance to molten metals and hot solids
Resistance to surface damage by fine particles according to EN 168: 2001,
K
clause 15
N Resistance to fogging
CE CE mark
0196 Notified Body
For a visor to comply with field of use symbol 3/8-1-0/9, both the visor and adapters must be
marked with these symbols, together with the symbol B.
Personal eye equipment
Regulation (EU) 2016/425
DD/MM/YY Manufacturing date (day/month/year)
V-Gard 950
Intended Use
GB
5