Siemens WATCHDOG Guia De Inicio Rapido página 5

Εnglish
WATCHDOG submodule,
6ES7138-7BB00-0AB0
Product information leaflet
This product information leaflet contains important information
about the WATCHDOG submodule.
Characteristics
• This WATCHDOG submodule is used to check the
functionality of the ET 200iSP by writing and reading I/O
outputs via the process output and process input image.
• The WATCHDOG submodule is plugged into the
TM-IM/EM or TM-EM/EM terminal submodule.
Further information
Further information about the WATCHDOG submodule is
provided in the ET 200iSP Distributed I/O
(6ES7 152-1AA00-8BA0) manual.
This manual can be requested from the Siemens
representative or office in your area or free-of-charge on the
Internet at:
http://www.siemens.com/automation/service&support
Maintenance
The WATCHDOG submodule is maintenance-free. If a repair
is necessary, the electronic submodule must be returned to
the following address:
Siemens AG, Elektronikwerk,
Östliche Rheinbrückenstr. 50, D-76187 Karlsruhe
Repairs may only be performed by the manufacturer.
A5E00807410-03 Εnglish