Installing And Connecting The Refrigerator; Safety Instructions For Installation On Boats - Dometic CRX 50 Instrucciones De Montaje

Nevera con compresor
Ocultar thumbs Ver también para CRX 50:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 90

Installing and connecting the refrigerator

7
Installing and connecting the
refrigerator
7.1

Safety instructions for installation on boats

Please note the following instructions for installation on boats:
D
DANGER!
If the appliance is powered by the mains, ensure that the voltage supply
has a residual current circuit breaker.
A
NOTICE!
• The device can be tilted sideways up to 30°. When setting up the
refrigerator, note that it must be fastened to take account of this. If
you have any questions regarding installation, consult your specialist
dealer.
• Install the refrigerator so that the warm air produced can easily flow
away (either upwards or to the sides, fig. 8, page 6).
• The appliance is designed for ambient temperatures between
+16 °C and +43 °C.
• CRX140ACDC: In winter mode the appliance can be operated at
ambient temperatures between +10 °C and +16 °C.
7.2
Notes on installing the refrigerator
Observe the following when installing the refrigerator:
• Install the refrigerator so that the warm air produced can easily flow away
(either upwards or to the sides, fig. 8, page 6).
Key for fig. 8, page 6
No.
Explanation
1
Cold intake air
2
Hot waste air
3
Condenser
4
Spacing above the refrigerator if there is not sufficient air to circulate
above or at the side.
20
CRX
EN

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Crx 65Crx 80Crx 110Crx 140

Tabla de contenido