Publicidad
Idiomas disponibles
Idiomas disponibles
(3) Gently put the unit into the hole. Release the
spring clips and the clips will fasten the unit firmly
onto the drop ceiling. (FIGURE 4)
FIGURE 4
WIRING INSTRUCTION
(1) Switch off the power source or wall switch.
(2) Lift the protection case to remove it and unscrew
two screws to release the cable fastener. On the
rear side are the wiring terminals. (FIGURE 5)
Cable
fastener
FIGURE 5
(3) Study FIGURE 6a for wiring information on electra
e3.1 (slave) and the master detector (sold
separately). Then thread and fasten the power
cable as indicated in FIGURE 6b.
Warning: Incorrect wiring could damage the
sensor and also may cause electrical harm.
Slave
From AC power
Master
FIGURE 6a
Protection
case
Wiring
terminals
Load
FIGURE 6b
OPERATION
Automatic Operation
electra e3.1 will notify the master detector when it
detects motion, and actions will be executed
according to the master detector's settings.
TROUBLESHOOTING
Light does not turn on
Confirm that you have made a correct wiring
connection.
Make sure that the bulbs have not burned out.
Light remains on
Make sure the wiring connection is correct.
SPECIFICATIONS
Power Requirement
Detection Angle at
2.5m Height
Detection Distance at
2.5m Height
Mounting Height
Sensor Operation
Warm Up Time
Working Temperature -10°C - +40°C
Protection Class
Protection Degree
Safety
*Specifications are subject to change without notice.
Warning:
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact
your
regarding the collection systems available.
If electrical appliances are disposed of in landfills or
dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging
your health and well-being.
When replacing old appliances with new ones, the
retailer is legally obligated to take back your old
appliance for disposal at least for free of charge.
2
AC 220 - 240V / 50Hz
Up to 360° at 25°C
Micro motion: up to 3m radius
Walk across: up to 5m radius
Recommended 2.5 - 3.5m (8.2
- 11.5 Ft) Ceiling Mount
Auto mode
About 1 min
Class II
IP20
CE
local government for information
Publicidad
