Seat Assembly - Belluno Baby Tirrenia Manual De Instrucciones Para Armado Y Uso

SEAT ASSEMBLY

01
Attach the backrest and the
seat to the left leg. Tighten
the plastic screws with the
help of the key.
03
Attach the right leg of the
chair to the other side of the
seat and make sure it is
properly tightened with the
screws.
16
02
Engage one end of the
footrest onto one of the
legs. Tighten the screws to
secure it.
04
Repeat step 2 for the other
end of the footrest
complete its placement.
05
In this way, you will finish
with the complete assembly
of the seat.
07
Do not forget to place the
central support
plastic screws between both
legs to achieve a correct and
secure grip.
to
06
If you want to use the chair
as a rocking chair, just fit it
on the base of the rocking
legs (#1 and #2).
NOTE:
The footrest can remain
attached or removed,
whichever is most
comfortable for your baby.
and its
Chair and table can be
used independently when
children grow up, as shown
in the image below.
This functionality
recommended
months onwards, always
under the supervision of an
adult.
is
from 18
17