Start - First Connection - Haverland RCV LCD Manual De Instrucciones

EN 3. OPERATION

3.3 START - FIRST CONNECTION

As soon as the radiator is connected to electricity, press the switch located on the right side:
1
All icons are shown on the screen:
2
Then, a second screen appears with the software version:
3
On the third screen:
• If the radiator was in MANUAL / ANTI-FREEZE / OFF mode:
- The main screen is displayed in MANUAL / ANTI-FREEZE / OFF mode. If you use the
radiator in manual mode or in anti-frost mode, it is not necessary to set the current
time and day.
• The radiator was in AUTO mode before the disconnection:
- If it is turned on of for the first time or if the radiator has been disconnected from the mains
for more than 6 hours, the radiator will ask you to set the current time and day.
- If it is not the first time or if the radiator has not been disconnected for more than 6 hours,
the main screen is displayed.
If the electrical disconnection is less than 6 hours, the current time and day of the week
are stored in memory; it even remembers the last operating mode.
The settings and selected temperatures are always stored in memory.
RCV LCD
48