Package Contents; Description (Fig. A); Electrical Safety - Elu MHA24 Manual Del Usuario

• When sawing with the workpiece clamped tight,
devices should be used to prevent the workpiece
kicking back.
• When sawing circular sections of wood use a
device to hold the workpiece steady on both
sides of the saw blade to prevent slipping.
• Ensure that pieces of wood sawn off the
workpiece cannot be caught up by the teeth of
the saw blade and thrown in the air.
Guard against kickback
• Kickback occurs when the saw begins to stall
rapidly and is driven back towards the operator.
Release the switch immediately if the blade sticks
or the saw stalls.
• Keep the saw blades sharp.
• Supports large panels near the cutting area.
• Use a fence or straight edge guide when ripping;
do not force the tool.
• Do not remove the saw from the work during a
cut while the saw blade is rotating.

Package contents

The package contains:
1 Cordless circular saw
1 Saw blade
1 Allen key
1 Battery pack
1 Charger
1 Case (K-models only)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand
this manual prior to operation.

Description (fig. A)

Your Elu cordless circular saw has been designed
for professional sawing applications.
1 On/off-switch
2 Lock-off button
3 Front handle
4 Blade lock button
5 Dust spout
6 Bevel adjustment knob
7 Kerf indicator
8 Riving knife
19
9 Blade clamping screw
10 Lower guard
11 Lower guard retracting lever
12 Shoe
13 Depth adjustment lever
14 Battery release button
15 Battery pack
Charger
Your Elu charger accepts Elu 24 V NiCd and NiMH
battery packs.
15 Battery pack
16 Charger
17 Charging indicator (red)
18 Refresh mode button

Electrical safety

The electric motor has been designed for one
voltage only. Always check that the battery pack
power corresponds to the voltage on the rating
plate. Also make sure that the voltage of your
charger corresponds to that of your mains.
Your Elu charger is double insulated in
accordance with EN 50144.
Mains plug replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you
are competent to do this, proceed as instructed
below. If you are in doubt, contact an Elu
authorized repair agent or a qualified electrician.
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug
with bared copper conductors is dangerous if
engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs
fitted with the correctly rated fuse (1).
• The cable wire colours, or a letter, will be marked
at the connection points of most good quality
plugs. Attach the wires to their respective points
in the plug (see below). Brown is for Live (L) (2)
and Blue is for Neutral (N) (4).
• Before replacing the top cover of the mains plug
ensure that the cable restraint (3) is holding the
outer sheath of the cable firmly and that the two
leads are correctly fixed at the terminal screws.
E N G L I S H
en - 4