TROUBLESHOOTING
Störung
Index
Device does not work.
1
Paper is in the entry, but
shredder does not work.
2
The machine doesn't start
after inserting a sheet of
3
paper, or stops running when
paper is being inserted.
Device stops working during
operation.
4
Paper is jammed and the
device stopped rotating.
5
DISPOSAL
The symbol depicting a crossed-out rubbish bin means that electrical devices
may not be disposed with regular household waste. Please bring the device to
an approved recycling centre for environmentally friendly disposal.
WARRANTY
The warranty period for your device is 24 months.
Make sure to keep both your proof of purchase and the original packaging.
Please contact your retailer in case of any problems with the device.
Ursache
1. Power plug is not properly
connected to the power socket.
2. The main On/Off switch is on Off
position.
3. The front Power switch is not
activated.
4. The device hasn't been assemb-
led properly.
After feeding paper, a corner
of the paper is inserted, but
the rest doesn't touch the
automatic inductive device.
The paper is too thin, too soft,
humid, or too crinkly to acti-
vate the automatic inductive
device.
The device has been operated
for an extended period of
time and is automatically pro-
tected when it overheats.
1.The amount of inserted
paper exceeds the limitation.
2.Paper has not been fed in
an even position.
Abhilfe
1. Connect the power plug to the
power socket.
2. Set the On/Off switch to its ON
position.
3. Press the front power switch
so it becomes activated again.
4. Ensure that the waste basket
has been inserted properly.
Adapt the position of the
feeding paper and make it
touch the automatic inductive
device.
1. Fold the paper and then
insert it.
2. Set the slide switch to "REV".
Disconnect the power plug
from the power socket and
allow the motor to cool down
to room temperature.
1.Set the slide switch to
"REV" and withdraw the
shredding paper.
2. Unplug and leave device
shut off for a short period
before resuming shredding.
GB
15