Telstar TVP016410MD Manual De Instrucciones página 11

USER SERVICING INSTRUCTION
a)
Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.
b)
Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades.
c)
Remove fuse carefully. Insert the tip of your tool Into fuse slot (close with the terminal), then prize the fuse
gradually and slowly, but not overexert. If you feel tight, you can try it at
several times and prize the fuse little by little. When one side of the fuse has been prized, then you can get the
fuse out entirely.
d)
Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
e)
Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
f)
Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed.
Discard product if the attachment plug is damaged.
Notice:
1.
When you replace the fuse, please don't operate suddenly or overexert, or else the product will be damage
or cause accident.
2.
When you feel it hard to be operated, please make sure you have got the right way.
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with mild soap and a damp cloth or sponge.
Thoroughly to remove soap film with clean water.
3. Be sure not to make water or other liquid enter inside of motor.
11
STAND UP FAN
TVP016410MD