Operating Instructions; How To Charge The Battery; Charging Process - Felisatti RS135/18L Manual De Instrucciones Original

1. How to charge the battery

(1) Insert the plug of the charger in the socket, and the charging indicating lamp will be
flickered in green,red and yellow in turn within one second. And then, the battery
charger will be in the standby position.
(2) Insert the battery in the battery charger considering the polarity, and the charging will
be started immediately.
A new battery will work properly after five times of charging and discharging.
Charge and discharge the battery, which is not used for a long time, for two to
three times to function well.
(3) When the battery working time is remarkably short despite full charging, the life of the
battery may be over. Replace the battery immediately.
Take care not to short-circuit the terminal of the battery. The short-circuit of the
terminal may cause a fire or explosion doing a serious personal injury.

2. Charging process

Use only the specified battery and battery charger. Otherwise battery and
charger can be damaged by fire, explosion, charging error or overheat.
1) Charging indication
Green Blinks
Red Lights
Green Lights
Red Blinks
Yellow Blinks
Be sure to unplug the charger after finishing the charging.
2) If charging of the heated battery is attempted immediately after it has been used or
charged, indicator blinks in red (overheat standby). Also, cooling fan in the charger
automatically starts running to cool the hot battery down to normal temperature and,
after the cooling, indication changes to red glowing and charging begins.
3) This charger detects charge status and transfers to fine charging mode when the
battery has been almost fully charged and keeps the battery in full charge state.
14

Operating Instructions

: Before charging
: While charging
: Charging completed
: Overheat standby
(Battery overheated)
: Charging impossible
7