Power Source; Check Before Use - Felisatti RS135/18L Manual De Instrucciones Original

Charge only
batteries may burst causing personal injury and damage
Do not disassemble battery.
Imcorrect reassembly may result in a risk of electric shock, electrocution or fire.
Accessories may be hot after prolonged use.
When removing the bit from the tool avoid contact with skin and use proper
protective gloves when grasping the bit or accessory.
Keep the battery from being overheated.
If overheated battery is inserted, high temperature standby is indicated and charging
can only start after the battery has been cooled down.
Leaving the battery for a prolonged time without using it will shorten the life
of the battery.
If the battery is to be stored for a prolonged time, charge it completely before storing it.
To use the battery for a long period of time, charge it completely every 3 months.

1. Power Source

Observe correct main voltage. The voltage of power source must agree with the
voltage specified in the name plate.
Please check if the rated voltage of the product is same as the rated voltage of
the battery.
Using the battery with higher rated voltage can result in burning and damaging of
the motor.
2. Attachment of the battery
Make sure the battery is attached correctly before you use the tool
Make sure the battery is attached in the body of the tool tightly before you start
operation. When the battery is not attached tightly, it may be fallen during the operation
and cause an injury in the top of your foot.
3. Polarity of the battery
Please check the polarity of the battery is same as the product.
When the polarity of the battery is not correct, it may cause the trouble of the
switch.
Felisatti
appoved rechargeable batteries. Other types of

Check before Use

3
7