Features; Specification; Operation Guide - BGS technic 3401 Instruction Manual

Aparato de detección de fugas de formigas
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2. FEATURES

This Forming Gas Leak Detector can quickly detect the leakage. And its sensitivity is less than 5 ppm.
A new Forming Gas mixture 5% Hydrogen (H2) + 95% Nitrogen (N) is used in the refrigerant or air-
conditioning systems for detecting leaks. Therefore, a good leakage detector can help the
maintenance service to trace the leakage and improve the cooling efficiency.
Microprocessor Control with advanced digital signal processing
Multicolor visual display
High-median-Low leak sensitivity selector
Low battery indication
Semiconductor gas sensor
Detection of mixture 5% Hydrogen (H2) + 95% Nitrogen (N)
Carrying case included
15.5" (40 CM) flexible stainless probe
Ambient concentration reset
Long-life, DC brush less fan
Automatic zero and background compensation

3. SPECIFICATION

Detectable Gases: mixture 5% Hydrogen (H2) + 95% Nitrogen(N)
Sensitivity: Less than 5 ppm
95%N 2,5%H2
Alarm Method: Buzzer, Tricolor LED bar Indicator.
Power Usage: 4 AA size (6V DC) Alkaline Batteries
Snake Tube length: 40cm (15.5")
Dimension: 173 x 66 x 56 mm
Weight: approx. 400g
Accessories: Alkaline batteries (AA) X 4 pcs.
User manual, carry case.
Battery Life: approx. 7 hours normal use
Auto power OFF: 10 minutes
Disable Auto Power Off: Press and Hold "Hi" button then power on the meter
Warm-Up Time: approx. 45 seconds
Operating Temperature: 0-40°C
Humidity: < 80% RH
Storage Temperature: -10 - 60°C
Storage Humidity: < 70% RH
Altitude: < 2000 m

4. OPERATION GUIDE

(1) The Forming Gas Leak Detector unit is not equipped with anti-explosive designs and measures.
Do not use this unit in the environment with the burnable gases.
(2) There are some environmental conditions that might cause error reading:
Pollutant places.
Large temperature variation.
Places with high wind velocity.
Organic solvent, adhesive vapor, fuel gas and vesicant will cause abnormal response from the
sensor. Try to avoid the environment involved with this substance.
Places fill with too much to Hydrogen Gas.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
H
2g/year
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
M
15g/year
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
L
30g/year

Publicidad

Tabla de contenido
loading

Tabla de contenido