Control Wiring - Cooper Lighting RRU-UNV Instrucciones De Instalación

vii. You can alter output levels collectively or individually,
as required:
• Collectively - Highlight the "All Outputs" option
and either type the required dimming level using
the keypad or use the
adjust the current value for all outputs and press
the button.
ENT
• Individually - Highlight the required output and
either type the required dimming level using the
keypad or use the
current value and press the
output value.
viii. To exit, press the
ESC
return to the previous screen.
or buttons to
or buttons to adjust
button to set the
ENT
button to save all changes and

Control Wiring

For Emergency Panel congurations, ensure the iLumin SC panel
is fed from an emergency power source.
The RRU-UNV provides a dry contact maintained closure to the
switch input 1 or switch input 2 terminal on the iLumin SC panel
input card.
Emergency actions can be programmed from the iLumin SC
panel on board user interface.
Switch
Input 1
iLumin Contact Inputs
#3 (12 AWG) capped off
#4 (12 AWG)
NC
#5 (12 AWG)
C
Relay
C
#1 (18 AWG) Black
#2 (18 AWG)
Hot 120-277 VAC
Neutral = White
To Normal Power Source
www.cooperlighting.com
RRU-UNV
Switch Switch
Input 1 Input 2
Contact Closure
Switch
Input 2
To override ON:
Connect dry contact
between on override
and +24 VDC. When
contact closes, all relays
are forced ON. Contacts
will close when normal
power is lost.
3