Programming Playlists; Troubleshooting - auna Graceland-XXL Manual De Usuario

PROGRAMMING PLAYLISTS

• While playing music from CD, USB doer SD, first press STOP, then PRO-
GRAM to select the programming mode. The lettering PROG indicates
this in the display. At the same time a position number appears, which
shows the current playlist position, i.e. first P01.
• Use the BACK and NEXT keys to select the title you want to place at this
position in the playlist and save by pressing PROGRAM.
• Repeat this step to add more titles to the playlist.
• Press PLAY to play the list.
• Press STOP to stop playback of the playlist and delete it.
• At the maximum number of tracks that can be included in the playlist,
the display shows „FUL".

TROUBLESHOOTING

Problem
No radio reception
CDs do not play, do
not rotate or "jump".
Programmed playlist
does not work
Possible cause and solution
The MODE selector switch is not in the FM/AM
position.
Turn the volume control (VOLUME).
Turn the TUNING knob to find a working station.
Turn the AUX switch on the rear panel to OFF.
Did you insert the CD with the printed side up?
Clean the CD.
Make sure the unit is placed on a level and shock
resistant surface.
Make sure that the unit is connected to the mains
and that the fuses are working.
Press STOP. Then program the playlist.
EN
23