Kyocera TASKalfa 180 Guia De Inicio Rapido

QUICKGuide
Clearing paper jams
Cassette 1 Pull out the cassette.
➊
(J11, J21)
Remove any jammed paper without
➋
tearing it.
If the paper does happen to tear,
NOTE
remove any loose scraps from inside
the machine.
➌ Push the cassette back in firmly.
Check to see if paper is out of
NOTE
position in the cassette. If the paper is
out of position, set the paper properly.
If JAM21 is displayed, remove the
NOTE
jammed paper referring to Paper Jam
in the Left Cover
Inside Cassette
➊ Open the left cover of the cassette
being used.
2 to 4
➋ Remove any jammed paper without
(J12 to 16, J22 to 24)
tearing it.
If the paper does happen to tear,
NOTE
remove any loose scraps from inside
the machine.
Close the left cover of the cassette.
❸
Pull out the cassette.
➍
➎ Remove any jammed paper without
tearing it.
If the paper does happen to tear,
NOTE
remove any loose scraps from inside
the machine.
Push the cassette back in firmly.
➏
Paper Output
➊ If jammed paper is seen through
the paper output slot, pull it out to
Slot (J50)
remove it.
If the paper does happen to tear,
NOTE
remove any loose scraps from inside
the machine.
➋ Pull the left cover handle up to
open the left cover.
➌ Remove any jammed paper without
tearing it.
If the paper does happen to tear,
NOTE
remove any loose scraps from inside
the machine.
Close the left cover.
➍
QUICKGuide
Operation panel
36 33 30
37 34 31 28 27 26
35 32 29
22 21
1 Start Key (Indicator)
2 Stop/Clear Key
3 Reset Key
4 Energy Saver Key
5 Numeric keys
6 Interrupt Key
7 Logout Key
8 Key
9 Key
10 OK Key
11 Auto%100% Key
12 Paper Supply Indicator
13 Paper Selection Key
14 Paper Supply Level Indicator
15 Paper Misfeed Indicator
16 MP Indicator
17 No. of Copies/Zoom Display
18 Message Display
19 Original Size Key
TASKalfa 180/220
① ②
① ②
③ ④
⑤
① ②
③ ④
TASKalfa 180/220
24 11
25 23 18 17 14 9 7 6
12
20 19 13 16 8
15 10
20 EcoPrint Key
21 Auto Density Key
22 Density Adjustment Key/Density
Display
23 Attention Indicator
24 Error Indicator
25 Add Toner Indicator
26 Maintenance Indicator
27 Image Quality Selection Key
28 Printer Key (Indicator)
29 2-sided Key
30 Mixed Original Size Key
31 Combine Key
32 Split Key
33 Program Key
34 Border Erase Key
35 Media Type Key
36 Collate Key
37 Margin Key
Inside the left Cover
(J20 to 50, J52 to 57,
J60, J61)
Multi-Purpose Tray
(J10)
Optional Document
Processor
(J70-75, J78)
Preparations
4
Optional settings
3
2
1
5
Clearing paper jams
Pull the left cover handle up to
➊
①
open the left cover.
The fixing unit is extremely
CAUTION
hot. Take sufficient care when working
inthis area, as there is a danger of
getting burned.
③
Remove any jammed paper without
➋
tearing it.
If the paper does happen to tear,
NOTE
remove any loose scraps from inside
the machine.
If the optional duplex unit is in-
➌
stalled, raise the duplex unit and re-
move any paper.
If the paper does happen to tear,
NOTE
remove any loose scraps from inside
the machine.
Close the left cover.
➍
Remove all of the paper remaining
➊
①
in the multi-purpose tray.
Reset the paper in the multi-purpo-
➋
se tray. The error message disappears.
Remove all of the originals
➊
①
remaining in the original table.
Open the left cover.
➋
Remove any jammed original
➌
without tearing it.
Raise the paper feed unit A.
➍
③
Remove any jammed originals
➎
without tearing them.
Turn the dial as shown in the
➏
illustration to remove the jammed
original.
⑥
Close the left cover to its original
➐
position. Reset all the originals and
start copying again.
For more details refer to the user
manual on the co-packed CD-ROM.
Copy Operation
Place the originals on the platen or in the
➊
optional document processor.
Enter the number of copies with the
➋
TEN
key.
PAD
Paper source
Select the desired paper source by pressing
button. If the setting APS is ac-
PAPER SELECTION
tive, the selected cassette with automatically
match the original format. Special sizes or pa-
pers should be used through the multi purpo-
se tray.
Adjusting the copy exposure
Choose the document type between
TEXT &
, and .
PHOTO PHOTO TEXT
Press or button to adjust the
LIGHTER DARKER
exposure, if needed.
Sort mode
Press button. Enter the number of co-
COLLATE
pies with the key. Press button.
TEN PAD START
Note The device is able to rotate each set, if
A4 and A4-R paper is avaliable.
ROTATE/OFFSET
has to be enabled to use this function. Refer to
the chapter System Setting in the user manual.
Preset Zoom
Press to light up the Auto% indi-
100%/AUTO%
cator. Press and select the
PAPER SELECTION
paper. Press to begin copying.
START
Choosing Zoom ratio
Press and . Change the zoom percentage
displayed using up or down. The percentage
can also be input using the keys. Press
TEN PAD
. Press .
OK START
Duplex copy
Press button until the desired duplex
2-SIDED
mode is selected. Choose between:
· 1-side original --> 2 sided copy
· 2-sided original --> 2 sided copy
· Book --> 2 sided copy
When choosing book, refer to the original size
indicators of the platen.
For more details refer to the user
manual on the co-packed CD-ROM.
②
②
②
④