Publicidad
Idiomas disponibles
Idiomas disponibles
Qi charging
Changing LED light color
Increasing/decreasing light brightness
Using the timer
With the light on, long-press the Timer button to turn on the timer function. The light will flash
twice as a confirmation. When the timer is enabled, the lamp will turn itself off automatically
after 40 minutes. Long-pressing the Timer button again will reset the timer.
Notes
• If your battery is completely discharged, it may take a few minutes before it starts charging.
This is perfectly normal. When charging begins, your phone will display the battery symbol.
• Devices may get warm during charging. This is completely normal, and they will gradually
cool down again as soon as they are fully charged.
• Charging time may vary based on the device's battery capacity, charge level, battery age,
and the temperature in the surrounding area.
Your Qi-compatible phone can be charged by placing it on
the Wireless Charging Area on the lamp base. To charge
wirelessly, place your device on top of the charging icon at
the center of the base. The device must be placed directly
over the icon for the charging function to work optimally.
Note that it may be necessary to activate wireless charging in
your device settings.
Short-press the Change light color button to switch
between natural, white and yellow light.
With the lamp on, short-press the Increase light brightness
or Decrease light brightness button to change the light
brightness.
EN
11
Publicidad
