Carbel KRONOS 100 DC Manual De Montaje, Uso Y Mantenimiento página 34

ASSEMBLY OF SPECIAL FRAMES
¡ Make sure the device is not connected to the electricity net!
The special frame has been designed to integrate the plate used to
cover the ventilators, so this plate should be removed. To do so, please
follow these Recommendations:
1º Detach the door of the device lifting the hinges out of its' interior
shaft.
2º unscrew the screws on the plate covering the ventilators and take
it out.
3º disconnect the switches of the ventilators, please take a note of
how they are connected, as later they'll have to be reconnected:
Blue cable
Brown cable
Red cable
4º Take the switch out and place it in the special frame
5º connect the cables to the switch again, making sure all cables are
in the same position as before
6º place the frame in the correct position, and screw into place with
the included screws
7º put the door back in its' place.
Switch – three positions
Position 1
Position 2
Position 3
34