Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE FIRST USE
•
Clean all parts (except the Thermostat Control Switch)
before using for the first time. (Refer to "CLEANING
INSTRUCTIONS" section)
•
Grill is fully immersible with the Thermostat Control
Switch removed.
•
NEVER use abrasive cleaners or scouring pads on the
non-stick surface as they might damage the coating.
HOW TO USE
PREPARE THE GRILL FOR COOKING:
•
Prepare the grill by adding enough water to the Drip Pan
so it covers the entire bottom surface to reduce smoking
during cooking and make clean up easier.
CONNECTING THERMOSTAT CONTROL SWITCH:
•
Make sure the Thermostat Control Switch is set to OFF, and
that it is NOT plugged into an electrical outlet. Also, ensure
that the unit and its parts are not hot.
•
Insert the extended rod piece on the Thermostat Control
Switch into the receptacle on the side of the Non-Stick
Grilling Surface until you feel it lock into place.
•
Plug the cord into 120V AC electrical outlet.
SETTING THE TEMPERATURE:
•
Set to desired temperature.
•
When setting the temperature, the indicator light on the
Thermostat Control Switch will light up indicating that the
power is now ON. When the desired temperature setting
has been reached, the light will shut off—this does not
mean the grill is OFF.
COOKING:
•
Coat the Non-Stick Grilling Surface with cooking spray or
oil.
•
Let the grill preheat for approximately 5 minutes or until
it reaches your desired temperature (when the indicator
light shuts off ).
•
Place desired food onto the grill to cook.
•
When grilling is complete, set the Thermostat Control
Switch to the OFF position and unplug it from the
electrical outlet.
Questions? We're here to help!
Visit: www.maxi-matic.com for support on this product.
NOTE:
-
The initial 15 minutes
of use may result
in minimal smell
and smoke. This is
normal and harmless
and comes from the
protective substance
applied to the heating
elements during
manufacturing.
-
Always use the electric
grill on a dry, level,
heat-resistant surface
and where it won't
easily fall or tip over.
-
Do not use the grill
without the Drip Pan
in place as it may
damage countertops,
tables, work surfaces,
etc.
-
Ensure that the Non-
Stick Grilling Surface is
securely positioned on
the Cool-Touch Grill
Base before using.
CAUTION:
Unplug from the
outlet when not in
use. Let all parts cool
completely before
cleaning.
5
5
Publicidad
Tabla de contenido
