Safety Note; Product Description; Installation Instructions - Vision-EL 801031 Guia Del Usuario

®

SAFETY NOTE

• Keep this note as long as you use the device.
• The assembly and the maintenance must be done by qualified people who can intervene on products that must be manually connect to 230V current
• Before any assembly, cut the power supply
• First of all connect the ground wire.
• The flexible outer cable of this lamp can not be replaced; if the cable is damaged, the lamp must be destroyed.
• The light source of this lamp is not replaceable ; when the light source reaches its end of life, the entire lamp must be replaced.
• The terminal block isn't included ; the installation may requiere the advice of a qualified person.
• Do not throw LED lamps on their end of life. Follow the instructions on www.recylum.fr
1. Product presentation
The RGB + CCT projector has 16 million colors and 9 color change modes. It can be controlled by a 7649 remote control. This product is made of aluminum, it is resistant to water and dust. It meets the
requirements for saving energy and protecting the environment. It can be installed outdoors or indoors.
2. Technical parameters
Model
801031 (100W)
Voltage AC 85-265V
Power
100W
Color temperature
2700K - 6500K
Luminous flow
720-870LM
Luminous efficiency
85LM/m
Standby power consumption 0.5W
IRC
>80
Power factor >0.90
Angle
160°
IP
IP65

3. Product Description

RF 2.4G remote control, 16 million color changing, saturation control.
Products equipped with the function retransmit signals 4 zones of the remote control at maximum 30m, including when an area is o by the remote control.
Dynamic Mode Sheet
Number Dynamic Mode
1
Gradual change of colors
2
Progressive change of white light
3
RGB progressive change
4
Seven colors to choose
5
Random change
Progressive change of red light
6
+ 3 ashes
Progressive change of green light
7
+ 3 ashes
Progressive change of blue light
8
+ 3 ashes
Progressive change of white light
9
+ 3 ashes
5. Remote control instruction
Note: Compatible with the remote control below (sold separately).
Synchronize and Desynchronize (remote control 7649)
Synchronize: Turn off the power and turn it back on for 5 seconds, press the "I" key three times for 3 seconds, the light will blink 3 times, the projector will be ready for operation,
Out of sync: Power off and on again 5 seconds, press 5 times "I" in 3 seconds, the light will flash 10 times, then the projector will be out of sync.
Ce produit est garanti contre tout défaut de fabrication pendant une durée de 2 ans / This product is guaranteed against any manufacturing defect during a duration of 2 years
Este producto es garantizado contra todo defecto de fabricación durante una duración de 2 años / Questo prodotto è garantito contro ogni difetto di fabbricazione durante una durata di 2 anni
NOTICE - INSTRUCTIONS - INSTRUCCIONES - AVVISO - BEKANNTMACHUNG
80103 (50W) 80102 (30W)
AC86-265V / 50-60Hz AC86-265V / 50-60Hz AC86-265V / 50-60Hz
50W 30W
2700K – 6500K 2700K – 6500K 2700K – 6500K
3500-4200LM 2500-2800LM
85LM/m 85LM/m
1.2W 1.2W
>80 >80
>0.9 >0.9
160° 160°
IP65 IP65
Brightness Speed Saturation
Adjustable
No Adjustable
Adjustable Adjustable Adjustable
No Adjustable
1. Long press "Master OFF" or "Zone OFF" to night light mode.
2. Long press "Master ON" or "Zone ON" to white light mode(100% brightness).
3. Touch "Color Ring" to change the colors.
4. Under white light mode, touch "Speed+" and "Speed-" to change color temperature.
5. Under color light mode, touch "Speed+" and "Speed-" to change color saturation.
6. Under Dynamic mode, touch "Speed+" and "Speed-" to change speed.
Link: First power o , then power on, within 3 seconds touch any of the Zone-ON button one times shortly, the
link is done when you see the light blinks 3 times with green color, otherwise try again later.
Unlink: First power o , then power on, within 3 seconds long touch the linked Zone-ON button or the
Master-ON button ,the unlink is done when you see the light blinks 10 times with red color, otherwise try
again later.
Dieses Produkt ist gegen jeden Fabrikationsfehler während einer Dauer von 2 Jahren garantiert
80103 (50W)
220mm
80101 (20W) 80100 (10W)
AC86-265V / 50-60Hz
20W 10W
2700K – 6500K
1500-1800LM 750-900LM
85LM/m 85LM/m
80101 (20W)
1.2W 0.5W
152mm
>80 >80
>0.9 >0.65
160° 160°
IP65 IP65

4. Installation instructions

AC86V~265V
(L) (N)
Brown Blue
EMC
960°
80102 (30W)
47.5mm 167mm
80100 (10W)
107mm
40mm
( )
Yellow-Green
801031 (100W)
40mm
801031 (100W)
32mm
Customers service
MIIDEX FRANCE
1 rue Isaac Newton
31830 Plaisance Du Touch
FRANCE
www.miidex.com