2.3 General installation Recommendations
The installation of the appliance must comply with all local regulations, including those that refer to national and
European standards.
Although the following describes an example installation to ensure good performance, it may not be ideal for
your circumstances. In any case, the installation should be done by an authorised installer.
CARBEL will be responsible for the provided appliance, but in no case for the installation of the same.
1
4
1. Fumes exhaust pipe Ø 200 or 150, according to model.
8
2. Entry of air into the chimney chamber by natural convection.
3. Entry of air into the cassette convection chamber, drawn in by fans .
4. Optional entry of air from the outside used for combustion (optional lower or rear
connection)
5. Hot air outlet at the top of the front blown by fans .
7
6. Hot air outlet driven by fans .
7. Hot air outlet of the chimney chamber by natural convection. .
6
8. Optional outlet for hot air to other rooms, blown by fans
5
3
2
15