Tabla de contenido
Publicidad
3. 7 Tips for using your cassette and OPTIMAL adjustment of the air intakes:
Once the unit has completed a first combustion cycle and it is hot enough, it is advisable to follow these
Recommendations to get the most out of your product.
Spread the embers from previous combustion cycles across the bottom of the burner.
It is preferable to use opened beech or similar wood with a humidity percentage of less than 20%.
Recommended fuel size
Mod. I 60: one piece of wood between 30 and 40 centimeters in length and 1 to 1.5 kg weight.
Mod. I 70: one piece of wood between 30 and 45 centimeters in length and 1 to 1.6 kg weight.
Mod. I 80: one piece of wood between 40 and 55 centimeters in length and 1.25 to 1,8 kg weight.
Mod. I 100: one piece of wood between 45 and 65 centimeters in length and1.6 to 2 kg weight.
Adjust the primary air inlet to an opening of between 5 and 8 mm.
-
Adjust the secondary air inlet to halfway, i.e. at an angle of approximately 90º with the front of the device.
-
To obtain stable and optimal performance and a clear view of the flames through the glass try to make
consecutive loads of wood with pieces as similar as possible, for that you must keep the same air inlet regulation
at any time.
4. MAINTENANCE
To clean the glass, be careful to spray the cleaning product on a cloth and clean only the glass, without wetting
the rest of the door. Window-cleaners and special products often contain chemicals that attack the paint and the
ceramic fiber seals and cause oxidation of the metal parts.
It is very important not to wet the wood burner with window-cleaner, water or special cleaning products.
Heatproof paint is not waterproof.
Clean the paintwork with a feather duster or a soft, dry cloth. If over time you want to repaint the insert, the
manufacturer makes a spray paint available from your dealer.
5. TIPS, CHIMNEY SWEEPING and SAFETY STANDARDS
Whenever the stove is used, there is a certain risk that must be taken into account. Therefore, the following
instructions must be observed:
− After a prolonged period of not using the device, check the chimney to make sure it is not blocked.
− You should check the chimney regularly and keep it clean and in good condition. Creosote build-up in the
chimney could cause it to catch fire.
− Keeping the chimney conduct clean is of vital importance. The chimney should be cleaned periodically,
depending on the frequency of use and the type and humidity of the fuel used.
− The maintenance of the appliance and the sweeping of the chimney should be done by a qualified
professional.
− Warn children of the danger of burns.
− Only retire the ashes when the stove is not working, and deposit them in a metallic container, there might be
burning embers among the ashes.
− Do not modify the appliance without authorization and use only original spare parts.
21
Publicidad
Tabla de contenido
