List Of Spare Parts - Kettler NKS-SELECTION GOLF S Instrucciones De Montaje

Handling the equipment
I Before using the equipment for exercise, check carefully to ensure
that it has been correctly assembled.
I Before beginning your first training session, familiarize yourself
thoroughly with all the functions and settings of the unit.
I It is not recommended to use or store the apparatus in a damp
room as this may cause it to rust. Please ensure that no part
of the machine comes in contact with liquids (drinks,
perspiration etc.). This may cause corrosion.
I The machine is designed for use by adults and children should not
be allowed to play with it. Children at play behave unpredictably
and dangerous situations may occur for which the manufacturer
cannot be held liable. If, in spite of this, children are allowed to
use the equipment, ensure that they are instructed in its proper use
and supervised accordingly.
I The exercise cycle complies with the DIN EN 957 - 1/5, class HB.
It is therefore unsuitable for therapeutic use.
I A slight production of noise at the bearing of the centrifugal mass
is due to the construction and has no negative effect upon ope-
Instructions for Assembly
I Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
I Before assembling the equipment, study the drawings carefully and
carry out the operations in the order shown by the diagrams. The
correct sequence is given in capital letters.
I The equipment must be assembled with due care by an adult person.
If in doubt call upon the help of a second person, if possible tech-
nically talented.
I Please note that there is always a danger of injury when working
with tools or doing manual work. Therefore please be careful when
assembling this machine.
I Ensure that your working area is free of possible sources of
danger, for example don't leave any tools lying around. Always
dispose packaging material in such a way that it may not cause
any danger. There is always a risk of suffocation if children
play with plastic bags!
List of spare parts page 24-25
When ordering spare parts, always state the full article number, spare-
partnumber, the quantity required and the S/N of the product (see
handling).
Example order: Art.no. 07660-700 / spare-part no. 10100030 /
2 pieces / S/N ....................
Please keep original packaging of this article, so that it may be used
for transport at a later date, if necessary.
Goods may only be returned after prior arrangement and in (internal)
packaging, which is safe for transportation, in the original box if pos-
sible.
It is important to provide a detailed defect description / damage report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with fastening
material".
4
ration. Possibly occurring noise during reverse pedalling result from
engineering and are absolutely safe.
I Use for your regular cleaning, maintenance and care our appliance
maintenance set (Article no. 07921-000) specifically licensed
for KETTLER Sports apparatus and available from the Sport spe-
cialized trade.
I The exercise cycle has a magnetic brake system.
I To operate correctly, the pulse function requires a minimum voltage
of 2,7 volts (only for computers working with batteries).
I The equipment is dependent of revolutions per minute.
I Please ensure that liquids or perspiration never enter
the machine or the electronics.
I Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
I Always wear suitable shoes when using.
I Nobody may be in the moving range of a training person during
training
I The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as instructed.
The required tools are supplied with the equipment.
I Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resis-
tance is felt, then use spanner to finally tighten nuts com-
pletely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function cor-
rectly (the locking device is destroyed), and must be replaced.
I To pull off the pedal arms remove cap and screw (A). Grip the pedal
arm tightly, and screw in an M12 bolt (not supplied) into the thread
(B). After a few turns you may take off the pedal arm (C).
I For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).
I Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please
dispose of this article correctly and safely (local refuse sites).
KETTLER (GB) Ltd.
GB
Merse Road · North Moons Moat · Redditch,
Worcestershire B98 9HL · Great Britain
http://www.kettler.co.uk
KETTLER International Inc.
USA
1355, London Bridge Road · Virginia Beach · Virginia VA
23453,USA
http://www.kettlerusa.com