Product Safety Information; Product Specifications - Ingersoll Rand 7804R Especificaciones Del Producto

Product Safety Information

Intended Use:
These Air Drills are designed for drilling, honing, reaming and hole sawing.
For additional information refer to Product Safety Information Manual Form 04580353.
Manuals can be downloaded from ingersollrandproducts.com

Product Specifications

Models Style
LA410, LA410-EU Inline
LA411-EU Lever
7804R, 7804R-EU Angle
7807R, 7807R-EU Angle
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16573180 and table on page 2. Maintenance frequency is shown in a circular
arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
6. Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
Original instructions are in English. Other languages are a translation of the original instructions.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Office or Distributor.
16571846_ed3
Free Chuck
Speed Capacity
rpm inch (mm) † Pressure (L
4500 3/8 (10)
1800 3/8 (10)
1200 3/8 (10)
1800 3/8 (10)
WARNING
7.
8.
9.
10. Grease - during assembly
11. Grease - through fitting
Sound Level dB(A)
(ISO 15744)
) ‡ Power (L
p
81.9 92.9
78.0 --
88.4 99.4
88.4 99.4
* K = Vibration measurement uncertainty
Coupling
Safety Air Fuse
Oil
EN
Vibration (m/s²)
(ISO28927)
) Level *K
w
2.9 0.7
< 2.5 --
< 2.5 --
< 2.5 --
EN-1