Fein MultiMaster FMM 250 Instrucciones De Uso página 6

EN
Handling Dusts Detrimental to Health
Some dusts created by san-
WARNING
ding, sawing and other ope-
rations contain chemicals known to the State
of California to cause cancer, birth defects
and other reproductive harm.
Some examples of these chemicals are:
– Lead from lead-based paints.
– Crystalline silica from bricks and cement
and other masonry products.
– Arsenic and chromium from chemically-
treated lumber.
Hand/arm vibrations
Whilst working with this
WARNING
power tool, hand/arm vibra-
tions occur. These can lead to health impair-
ments.
The vibration emission
WARNING
value during actual use of
the power tool can differ from the declared
value depending on the ways in which the
tool is used.
It is necessary to identify
WARNING
safety measures to protect
the operator that are based on an estima-
tion of exposure in the actual conditions of
use (taking into account of all parts of the
operating cycle such as the times when the
tool is switched off and when it is running
idle in addition to the trigger time).
Adopt the correct working practices in
order to reduce the exposure to vibration:
– in the case of strong vibration, take the
recommended work breaks or change
your task more frequently,
– keep your hands warm,
– whilst working, only grip the power tool
as firmly as necessary,
– work only with technically sound machi-
nes and application tools,
6
M M
ULTI
All manuals and user guides at all-guides.com
– Asbestos and materials containing asbes-
tos.
– Wood dust from beech and oak wood.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
– select the oscillating frequency according
to the FEIN operating data; avoid reso-
nance,
– use the FEIN vibration-absorbing, gel
working gloves.
If these recommendations are not obser-
ved, the exposure to strong vibration
during daily work over a longer period of
time can be detrimental to health.
To prognosticate the vibration exposition,
you can use the weighted acceleration value
determined in the laboratory (see the Vib-
rations table). During work, weighted acce-
lerations will be dependent on the
particular application, and deviation from
this laboratory value can occur.
FMM 250 / M
ASTER ULTI
M FMM 250 Q
ASTER