Cleaning And Maintenance - Domo DO725K Manual De Instrucciones

Cafetera espresso semiprofesional con molinillo
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 53
HOT WATER FEATURE
1.
Place a cup under the steam nozzle.
2.
Press the hot water button. Hot water will flow from the steam nozzle.
3.
When there is ±200 ml of hot water in your cup, the machine will stop automatically. If you want less
water, you can stop the machine by pressing the hot water button again.

CLEANING AND MAINTENANCE

! Note: Before cleaning the unit, pull the plug out of the power socket and let the unit cool down. To
avoid the risk of electric shock, never immerse the cord, plug, or unit in water or other liquids.
·
Clean all removable parts (filters, portafilter, tamper, water reservoir, bean reservoir, grinder support,
drip tray, and grille) with clean warm water after use. Never use aggressive or abrasive cleaning
agents. Dry off the parts before putting them back.
! Note: these parts are not dishwasher safe. Only the portafilter and 2 filters can be cleaned in the
dishwasher.
·
Wipe the unit housing clean with a soft, damp cloth to remove stains.
·
Flush the unit regularly by brewing without putting ground coffee in the filter.
·
Flush out the steam nozzle regularly by using the hot water feature. You can clear the opening of the
nozzle with the needle of the cleaning pin.
Cleaning the grinder
We recommend cleaning the grinder after each use.
1.
Remove the grinder support from the appliance by lifting it up.
2.
Remove the grinder. Turn the grinding gear to the number marking 15. Press the release button and
continue to turn the grinder counter-clockwise. Lift the grinder out vertically.
3.
The grinder outlet (black) is at the bottom of the grinder. Unscrew it from the grinder.
4.
Clean both parts of the grinder with the cleaning brush.
! Note: do not clean the grinder with water.
5.
Regularly clean the shaft of the grinder outlet using the brush supplied to avoid or remove build-up.
6.
Return everything to its original position. Align the protrusion on the grinder with the slot in the
appliance. Push the grinder in and turn it clockwise until you hear a click.
50
DO725K
6
5
OFF
2
1
7

Publicidad

Tabla de contenido
loading

Tabla de contenido