3.1
Operating Instructions
Company:
Place of work:
Operation:
Risks to People and the Environment
Falling of loads or parts
Crushing and shearing points when moving the lifting platform
Danger due to uncontrolled moving parts
Protective Measures and Rules of Conduct
Before starting work:
Lifting platforms may only be used independently by trained persons over the age
of 18 who have been instructed in writing.
When working with more than one person, a supervisor must be appointed
Daily functional check
Observe the manufacturer's operating instructions
During operation:
Pay attention to crush and shear points in the environment
Do not load the lifting platform above the permitted maximum load
Do not lift people
Do not shake the lifting platform, avoid rocking.
When lowering, do not stand in the lifting platform movement area
Arrange regular checks of the lifting platform
Response to faults and hazards
In case of fault, stop the lifting platform immediately
Secure against further use
Report defects to the installer or manufacturer
First Aid
Inform first aiders (see alarm/emergency plan)
Treat injuries immediately
Enter into the accident book
Contact emergency services for serious injuries
Emergency number:
Ambulance service: _______________
Maintenance
Repair only by instructed and trained persons
Disconnect or secure the lifting platform from the mains power supply for set-up,
adjustment, maintenance or servicing
Clean the lifting platform after operation and check the hydraulic level
Annual check of the lifting platform by an authorised and trained person
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Operating Instructions
for
Lifting Platform
_____________
Manufacturer ATH-Heinl GmbH & CO.KG
- 18 -
Date:
Signature: