Continental LCA85BYI0 Manual De Usuario página 28

Drain hose installation
• The height of the drain hose (a) should be
between 86 to 100 cm.
• The diameter of the standpipe (b) should
be not less than 3 cm, and its drain ca-
pacity not less than 40 L/Min.
• Before washing machine starts, hang up
the drain hose from the standpipe that
should be placed 86 to 100 cm above the
floor level.
Installation of water inlet hose
On models having an inlet hose with 2 threaded connectors
• Tighten the end of the water inlet hose
that has a metallic filtering mesh on the
water tap.
Locking Nut
28
a
86 to 100 cm
b
• Firmly tighten the other end of the water
inlet hose onto the washer inlet valve
(with the rubber seal inside). When tight-
ening the locking nut, apply an even
force being careful not to twist or break
the water inlet valve.
Water Inlet Hose