STORAGE JAR WITH TAP
Parts overview
Tap
Assembly instructions
1. With the tap upside down, hand tighten
the nut clockwise on the inside of the
storage jar.
Hold the
tap
2. While holding the nut with one hand,
turn the tap (through half a turn*)
clockwise with your other hand to
tighten � rmly.
Turn upright
clockwise
3. If the storage jar has any leaks, repeat
steps 1 and 2 but turn the tap through
*3 quartes of a turn to get at tighter seal.
6
Glass
Washer 1
2 Gasket
Washer 2
Tighten
clockwise
Use
1. Please remember that your storage jar
is not made for hot beverages. Any use
of hot beverages in this container may
result in product malfunction, and/or
serious bodily harm.
2. Clean the storage jar, including prior to
us. Use soapy water no hotter than 40
°C. Clean the tap by allowing the soapy
water to run through it. Then rinse the
storage jar thoroughly with clean water,
allowing the clean water to run through
the tap.
3. Before using, make sure you tighten the
tap as per instructions above.
Manufactured in P.R.C.
Manufacturer:
Schou Company A/S
Nordager 31
DK-6000 Kolding
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.