miniland baby snailight Manual Del Usuario página 9

Note: Be careful not to touch the head of the snail when connecting for
charging, because if you come into contact with the touch power button it
may not turn red to indicate charging status. If this happens, disconnect and
reconnect.
WARNING 1: you must control the time during which the nightlight is left
charging.
It should never exceed the specified time. Otherwise, if you charge the
nightlight for too long it may affect battery performance, reducing the
operating time of the nightlight.
WARNING 2: If you use an adapter (not included) to connect the USB
terminal of the charge cable (7) to a conventional mains socket, make
sure the voltage and amperage output of the adapter are suitable for the
device: 5V ~ 500mA. Otherwise, any damage caused to the operation of
the device will not be covered by the product guarantee.
5.2. OPERATION
After charging the device fully once if it is the first time you use it:
1. Tap the touch button (1) to turn on the nightlight.
2. Select the desired light by pressing the same button (1). You can choose
between the rainbow option or a single fixed colour in the following
sequence.
1st touch: white
2nd touch: yellow
3rd touch: light blue
4th touch: purple
5th touch: orange
6th touch: green
7th touch: dark blue
8th touch: red
9th touch: changing colours in the rainbow mode
10th touch: the light turns off
3. If the nightlight battery is low it will start flashing red before turning off
completely.
9
ENGLISH